LG washing machines display not only error codes, but also informational messages. To recognize this message, carefully read the operating instructions.
If your CM shows CL error on the display, and you cannot set the washing mode, do not worry. Let's see what that means.
What does the CL code mean?
If the LG washing machine writes a CL error, this does not mean breakdown. This code informs the owner about the “Child protection” mode activated. Therefore, the panel with buttons is locked, which prevents keystrokes during washing.
Young children can either rearrange the program, turn off the wash, or break the ALG machine. Multifunctional equipment is equipped with many functions, so its panel is too sensitive and prone to breakage. For this, a security code is provided.
Why does the code appear
As we said, the CL (Child Lock) error does not report a malfunction.
You filled the tank with linen, turned on the wash, but the machine does not make any sounds, only CL is lit on the display. The fact is that if the lock was installed once, then it remains the same for the next wash, even if the LG washing machine is turned off.
The error will be displayed until it is turned off.
How to solve a problem
How to fix the situation yourself and eliminate the lock?
To clear the CL error, press the key combination on the control panel. For each Lji model (LG), it may be different. Here is an example of the most common commands. To use them, you need to press two buttons together for three seconds:
- Prewash + Super Rinse.
- Extra wash + Intensive wash.
- Temperature + Option key.
See the LG washing machine manual for more information. This should help clear up the CL error.
Please note that the layout of the buttons is different. They can be located below or above the display, or to the left of it.
How to recognize lock buttons
The manufacturer marks the buttons with either the baby's face on the panel or the lock with a smile.
It is important that for different models of SM LG “protection” acts differently. The keypad can be locked completely or partially. In this case, the On / Off button remains active, which is not always convenient, because if the child sharply turns off the machine during operation, the electronic controller may suffer.
Signs of breakage
When the LG typewriter shows a CL error on the display, and you cannot turn it off, this is cause for concern. During normal operation, the protection function must be turned on and off by pressing the keys. If this does not happen, a malfunction has occurred.
What to do if you notice signs of a problem
- You cannot set the washing mode, the machine generates a CL error code immediately after turning it on. Even after disconnecting the plug from the outlet, the error does not reset.
- The machine does the washing in normal mode, however, in the middle of the program, a malfunction code pops up.
- You independently connected the lock, but then the mode does not turn off or does it intermittently.
What to do in this case? It is necessary to check the multimeter control unit, for this it is necessary to disassemble the front panel. Then pull out the unit and ring the tester.
Additionally, check the contacts of keys that could oxidize over time. Also inspect control unit wiring, connections, connectors.
If the control board malfunctions, you need to replace it yourself or contact a service center.